HP PROBOOK 430 G1 SCREEN REPLACEMENT IN NAIROBI

Replacing the screen on an HP ProBook 430 G1 requires careful disassembly and installation. Here’s a step-by-step guide to help you understand the process:

1. Tools Required:

• Phillips screwdriver
• Plastic prying tool or spudger
• Tweezers (optional)
• A replacement screen (compatible with HP ProBook 430 G1)
• Anti-static wrist strap (recommended)

2. Steps for Screen Replacement:

Step 1: Power Down and Prepare

• Shut down the laptop completely.
• Unplug the charger and remove the battery to avoid electrical damage.

Step 2: Remove the Screen Bezel

• Use a plastic prying tool to carefully remove the screen bezel.
• Start from one corner and work your way around gently to avoid breaking the plastic clips.

Step 3: Unscrew the Screen Panel

• Locate the small screws securing the screen to the metal brackets.
• Unscrew them carefully and tilt the screen slightly forward.

Step 4: Disconnect the Screen Cable

• At the back of the screen, there is a video cable (LVDS cable).
• Carefully peel back any adhesive and disconnect the cable from the screen.

Step 5: Install the New Screen

• Take the new replacement screen and connect the video cable.
• Secure the screen with the screws on the side brackets.

Step 6: Reattach the Bezel

• Snap the screen bezel back into place by gently pressing along the edges.

Step 7: Test the Screen

• Reinsert the battery, power on the laptop, and check if the display is working correctly.

Tips:

• Handle the screen carefully to avoid cracks or scratches.
• If the screen doesn’t turn on, check the cable connection.
• Buy a compatible screen (usually 13.3″ LED HD, 30-pin connector).